Supports online

Kinh doanh 1 - 0908196901
Kinh doanh 2 - 0903202587
Skype nick
My status

Product Pictures

Banner

Useful Information

Bimetal Inlaid Self Lubricating Bearing

- Commodity: Bimetal Inlaid self-lubricating bearing

- Origin: China, Germany, Japan

- Price: Negotiate

- Specification: Order

- Warranty: 02 years

Product's feature

Bimetal inlaid self-lubricating bearings is made from medium or low carbon steel and the friction surface layer is the copper alloy with sufficient thickness and the two parts are firmly intergrated. On the friction surface layer, there are a certain number of blind holes (when the inner diameter is more than 200mm) or through holes (when the inner diameter is equal or less than 200mm) in which solid lubricant is inlaid, in the meantime, the surface of friction layer of the bearing is smeared with solid lubricating film that is helpful to the running - in procedure.

  • Advvantage:
  • - Saving material,  high loading capacity, lower cost
  • - Low friction coefficient.
  • - High abrasive resistance
  • - Various motion status of low speed and heavy load and the lubricating oil film can not be maintained.
  • - Owing to the restriction and limitation of the working enviroment or mechanical structure, it is difficult to provide oil for lubrication.
  • - Shock load is easily emerging during the work
  • - Working under the conditions of high temperature or low temperature or the ambient temperature changes in a wide range.

Mechanical material property

Allowable static load
N / mm ²
280
Allowable dynamic load N / mm ²
160
PV limit factor P=75 MPa
N / mm ² xm / s
1,6
Friction coefficient
μ
0,08 to 0,12
Ranges of operating temperature
° C
-80 to +250

Assembly Tolerance

Housing bore diameter
H7
Bearing outer diameter
s6
Bearing bore diameter
E8 before installation, H10 after installation
Shaft diameter
d8
Hardness of shaft
hardness> 180 HB
Roughness Ra 0,2 - 0,8 micromet

Dimension